| Customization: | Available |
|---|---|
| After-sales Service: | 1 year |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Electronic Salt Spray Corrosion Test Chamber Climate Salt Spray Test Equipment for Battery Metal DHL-60
Introduction
Salt spray testing chamber is the instrument to creat manual simulation salt mist environment to test anti-corrosion resistance of materials.Salt fog is the dispersed system made up of tiny liquid drop which contains salt in air.This instrument is one of three kinds of artificial environmental protection.Many companies need to test out the destructive effect on the products by simulate marine climate.that why comes out the salt spray testing chamber.The machine can be classified as neutural salt and
acid salt.the difference is based on the testing standards and testing method.respectively called "NSS" and "CASS" testing.
Application
Mechanical engineering,national defence industry,light industry,electronic engineering,instrument.,etc.
Features
1. Both inner container and outer container adopt epoxy glass entire molding.has the feature of light weight,corrosion resistance,high strength,non-permeation,smooth surface,easy to clean.
2. Salt mist can not be overflow with water seal.clamp cover duct insert heating,which makes temperature increased quickly.uniform temperature distribution.
3. The top cap has been designed with the angle 110 to 120°,in case condensate water will be dropped on the testing specimen.
4. Tower sprayer,it is placed at the middle bottom of working room.the material of nozzle is fired by quartz glass.it can spray tiny fog.the salt mist is setting freely and the has the uniform distribution.
5. The controlling system is put at the top right of machine.which will be convenient for users to operate.There is button of power turn on / off,exhausting fog,spray conversion,two piece of PID digital displaying instrument,timing of running and interval spraying on the panel.also it equip with the over heating protector.
Specification
| Model | DHL-60 | DHL-90 | DHL-120 | DHL-160 | DHL-200 |
| Volume | 108L | 270L | 600L | 960L | 1200L |
| Interior dimensions(mm)L*W*H | 600*450*400 | 900*600*500 | 1200*1000*600 | 1600*1000*600 | 2000*1000*600 |
| Exterior dimensions(mm)L*W*H | 1060*580*1050 | 1400*850*1200 | 1950*1250*1400 | 2300*1250*1500 | 2700*1250*1500 |
| Control system | 1.Adopt Japan IEC high-speed CPU, stable performance, safety and reliability | ||||
| 2.LED digital tube displaying, humanization interface, all information is clear at a glance. | |||||
| 3.Multi-fault warning protection system, anti-dry heating, anti-overheating | |||||
| 4.High-power SSR output, imported sterling silver relay contacts, with a service life to 106. | |||||
| 5.Multiple time modes, S, M,H can be switched as required. | |||||
| 6.Multi-control mode for continuous/discontinuous/manual/automatic testing. | |||||
| 7.With manual/automatic demist mode to ensure that the salt mist can't be leaked, so as to avoid corrosion of the laboratory. | |||||
| 8.Hidden correction method to ensure absolute temperature is under control. | |||||
| Water Replenishing system |
Automatic/manual water charging system, with the function of automatic/manual replenishment when the water level is insufficient. The experiment will be not interrupted which can be met the diverse environmental requirements for users (Automatic water replenishment only needs to be connected with water pipe). | ||||
| Heating mode | Direct steam heating.it has the feature of quick heating speed, uniform temperature distribution, and less stand-by time. | ||||
| Controlling mode | Touch controlling standard operation. With full detection fault pre-warning system. Lights up when fault occurs. Built-in manual defogging function, can be placed or viewed during the experiment to remove the experimental accumulation of salt spray. | ||||
| Safety protection device | With double over-temperature protection (Italian KGB), the heating power can be switched off automatically in the event of temperature control meter fault or a heating system fault. Avoid overheating damage on the instrument. Double low water level protection to prevent dry burning damage on the heat pipe of laboratory and pressure bucket With overload short circuit protection. To prevent damage on the instrument and internal electronic control accessories when an exception occurs. (Equip the low salt level warning of the brine bucket when doing experiment to avoid experimental abnormalities after the brine is finished) |
||||
| Dosage barrel | Built-in fog collection bucket. Compared to the traditional external type, it is less likely to be damaged. | ||||
| Nozzle | Precision quartz glass nozzle. Using 4000 hours without crystallizing can be guaranteed.The spray tower is equipped with a conical dispersive device, which has the functions of guiding fog, adjusting the amount of fog, and evenly falling fog. | ||||
| Sealing method | The inside and outside box is connected to the sealing groove, using water sealing. avoid salt spray leakage. | ||||
| Temperature range | 1: Laboratory temperature: 35°C--50°C (can be set arbitrarily) 2: Pressure bucket temperature:47°C--63°C (can be set arbitrarily) |
||||
| Heating rate | 1: Laboratory, room temperature---→35°C about 35 minutes 2:Pressure bucket, room temperature----→47°C about 15 minutes |
||||
| Temperature accuracy | ±1°C | ||||
| Power | 60/90 model AC220V 50HZ 15A 120 and more models AC220V 50HZ 20A This machine is suitable for neutral salt spray test (NSS) and corrosion test (AASS,CASS) |
||||
Packaging & Shipping
Cetification
){kind=link}