DE-120T Solid Liquid Powder Specific Gravity Meter, Chemical Density Measurement Device

• Customization: Available
• Warranty: 2 Years;Life-Long Maintenance
• Density Meter Type: Electronic Digital Density Meter
• Model NO.: DE-120T
• Certification: Ce, FCC
• Usage: Specific Gravity Meter
• Power Supply: European Standard AC 100V - 240V, Per Cu
• Density Resolution: 0.0001 g/cm3
• Maximum Weight: 120g
• Minimum Weight: 0.001g
• Interface: RS-232
• Delivery Time: 5-7 Days
• After-Sale Service Provided: Yes
• Testing Before Delivery: Yes
• Transport Package: Carton Packing
• Trademark: DahoMeter
• Origin: Dongguan, China
• HS Code: 9027809900
• Production Capacity: 300 Sets/Month

Product Description

DE-120T Solid Liquid Powder Specific Gravity Meter, Chemical Density Measurement Device

 

 
Application
 
It is suitable for the field of quality management,cost control,new formula
researching,new materials researching, scientific academies, researching key laboratories,quality inspection.dye,bleach,leather,glaze,clay suspension.,etc industrial.
 
 

Standards
 
According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc.
 
DE-120T can measure the density of solid and liquid; Features of simple operation,wide application,fully function; alarm rings when judge density is unqualified through the top and bottom limitation setting.About the solid mode,function of measuring DIN volume abrasion loss and expansibility of rubber,actual density and apparent density of powder,oil content of oil bearing,density of high density products.etc. adopt the memoryless dynamic measurement method for liquid mode; function of measuring density with three mode,get out of the cumbersome operation of re-calibrate when change weight. Function of displaying concentration,density and baume.
 
 

Specifications
 
Density resolution: 0.0001 g/cm3
Maximum weight:120g
Minimum weight: 0.001g
Measurement range: 0.0001-99.9999g/cm3
 
 

Features
 
(1) No need to open and close the lid,simple operation,shorter time measuring,according to the specification of new materials laboratory.
 
(2) Show the percentage composition of mixed samples for researching and developing new materials.
 
(3) Automatically judge whether density is qualified or not;prompt alarm.
 
(4) Function of solution compensation.either liquid or water can be used as medium.
 
(5) Function of setting actual water temperature,measuring medium density,and water proof medium density.
 
(6) Function of setting aerostatic buoyancy and the bound of density.
 
(7) Adopt the completed high-capacity measurement accessories with the transparent injection mould tank,which can resist wear,fall off,and corrosion.
 
(8) Density value of samples with the temperature from normal to 100 centigrade can be measured.
 
(9) Take samples conveniently;50CC or less would be okay.
 
(10) It is very easy to clean the measurement cup,and can't got the limitation of the size of pycnometer caliber.
 
(11) Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.
 
(12) Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.
 
(13) Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with instrument.
 
 

Measurement procedure of solid mode
 

• Place the sample on the test board to measure weight in air,press ENTER button to memory.
• Place the sample into the water to measure the weight,press ENTER button to memory.density value will be displayed

 
Measurement procedure of liquid mode
 

• Place breaker with samples on testing board.and take off the weigh of pothook.
• Make standard weight hanged on the pothook and submerged into the liquid to be tested totally.press the ENTER button to memory.Density value will be displayed.

 
Measurement procedure of hydroscopicity products(porosity products)
 

• Place the sample on the testing board to measure weight in air,press ENTER button to memory.
• Place the sample that did the waterproof treatment into water to measure the weight in water,press the ENTER button to memory.density value will be displayed.

 
Specification Table
 

Brand		DAHOMETER
Model		DE-120T
Density resolution		0.0001 g/cm3
Weight range		0.001~120g
Density range		0.0001-99.9999g/cm3
Solid   mode	Measuring solid items	Density of all forms of solid,including metal,rubber,plastic,film,floating body,powder,foam,viscous body,structure,tubing,wood,sponge,glass,pitch,cement,soil,gem,paper,concrete,graphite,coal,rock,ceramic.etc.(cover the products of hydroscopicity,non-absorbency,high - viscosity)
	Measuring mode	Archimedes principle A.general solid measuring method B.porosity materials saturation mode C.porosity materials surface covering method mode. D.professional constant volume mode method E.professional rubber abrasion loss and expansibility mode method F.professional hydroscopicity mode method G.professional oil length mode method
	Measurable project	density of general non-absorbency solid density of porosity materials oil length of oil bearing porosity of porosity materials DIN volume abrasion loss of rubber powder density water absorption rate
	Measuring time	About 5 seconds
	Memory method	memory in shorter time by one procedure
	Specific gravity measurement frame	unicase injection forming professional specific gravity mesaturement frame (size:length13.5mm×wide5mm×high11.6mm)
	Measurement tank	unicase injection forming transparent professional measurement tank (size:length16.9mm×wide9.8mm×high8.3mm)
	Result disply	Disply according to the model:density,specific gravity,apparent density,volume density,wet density,total porosity,effective porosity,oil content,water absorption,wear loss,wear index,expansibility,volume and so on.
	Funtion setting	Water temperature setting,density setting of medium of comparative solution,density setting of medium of waterproofing treatment ,boung setting,aerostatic buoyancy setting, Loss value setting of fixed weight of reference glue,loss value setting of weight of reference glue,density setting of reference glue.
	Mixed material percentage	Function introduction	automatically read the percentage of the main material in the two kinds of mixed materials
		setting	freely set the density value of main material and subordinate material
		disply	density value,percentage of main material
liquid mode	Measurement type	a:mobility liquid,vicidity liquid,volatile liquid,corrosivity liquid,high temperature liquid,suspension liquid,emulsion and so on.   b:alcohol,scaling powder,essence,blood,sodium chloride,glycerol,electrolyte,diesel,refrigerating,hydrofluoric acid,dichloromethane,vitriol
	Measurement principle	Archimedes principle displacement method
	Measurement mode	3 group
	Measurement time	about 5 seconds
	Memory mode	memory in shorter time by one procedure
	Result disply	Density and baume
	Specific Gravity Measurement frame	stainless steel specific gravity measurement frame
	Function setting	Temperature setting,density setting, measurement weights setting of standard sensor ball and weights setting in the water
	Measurement testing	distilled testing
Calibration mode		auto correction with one button,auto detection.
Output mode		standard interface of RS-232,output and Print testing data conveniently
Standard accessories		Host,tank,test board,tweezers,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement assembly
Optional accessories		DE-40 printer,DE-20B anti corrosive liquid measurement assembly
power		AC100V - 240V
Main feature		data display,accuracy,speediness,convenience Durable,economy

Packaging & Shipping






Our Services

• 100% Competitive price    we are the original manufacturer of densimeter for years, the large scale production make our products more competitive, that's the reason we are very confident to offer the most possible competitive price for the same level testing instruments in the world.
• High quality standards   we have the powerful professional researching and technology team to support quality;Our quality has been proved by the good market reaction for years;Our product are built to meet the industrial standards and global standards;Every instrument get checked and approved by our QC before delivery.
• Faultless service   we have the professional customer service team to provide the one to one service for you;we can help you to enjoy the one-stop service without any worries;we have the completed after-sales service policy and quality insurance policy;we guarantee instruments for one year and life-long maintenance(Gold Purity Tester for two years)
• Efficient logistics   we have the stable partner to help us to deliver the goods to the any corner of the worldwide shortly.Air shipment;International express:DHL/UPS/FEDEX/TNT(5 days to 7 days)
• OEM service   We are the original manufacturer of densimeter,that is verified by the third party and Alibaba on site;We can provide you OEM service and print your logo on the instruments.

Company Information

We, Dongguan Hongtuo Instrument Co., Ltd, a China based company, are pleased to introduce ourselves as a notable testing equipments and machines manufacturer.Our company was established in the year 2000 with two primarily motto, which includes complete client satisfaction and to reach top-most position in the international market. The exceptional quality of our products like Gold Tester,Gold Testing Machine,Density Meter,Universal Tensile Testing Machine,Climatic Chamber,Melt Flow Index Tester,Charpy Impact Testing Machine,Tap Density Tester,Abrasion Tester,Ultrasonic Flaw Detector,Surface Roughness Tester and other Laboratory Testing Equipment, etc. is our company's USP. 



Certifications